1. When you encounter a solid - liquid separation problems, it should be preferred SS centrifuge, the centrifuge structure is simple, cheap, easy to operate, general materials can be separated.

2. When your fine material particles, solid small centrifuge SSC should be used, because it can handle the material fine particles generally can not be separated in a centrifuge.

3. To avoid breakage of crystal materials, volatile separation, the choice of hermetic separation, easy cleaning of the filter bag SD-type punching bag centrifuge.

4. If you want to reduce labor intensity and improve work efficiency, the choice of SG or SX Discharge Centrifuge stable condition if the production process, a large amount of processing, assembly line, the choice of SGZ automatic centrifuge.

5. If the material you are separated suspension concentration than thin, solid particles contained in the fine, and the processing capacity, can be used LW horizontal spiral centrifuge discharge.

6. When your material coarse particles, and the production capacity is large, it can be used ZLP type continuous discharge cone basket centrifuge.

7. If you are separated material is flammable, explosive, toxic items, please choose SDXZ bag type centrifuge, it is a fully enclosed, hydraulic transmission, hydraulic brake centrifuges.

8. We will make every effort to provide compliance with styling or special items that you requested, and the whole steel, half stainless steel, stainless steel, plastic-lined, rubber lining, PTFE lined, titanium and other materials for you to choose, we would be happy for you service!

Recommendation Selection:

Users in the choice of the centrifuge, the centrifuge should be fully taken into account the factors of occasions, temperature, material properties, etc., to achieve the desired results. Selection should focus on the following aspects:

1, corrosion resistance: centrifuges separated material generally have a certain degree of corrosion, material contact parts of corrosion-resistant materials and must meet the requirements to ensure the safe use of centrifuges.

(1) structure material types are: Q235.A, Q345.B, SUS304, SUS321, SUS316, SUS316L, Titanium, Hastelloy.

(2) Surface treatment methods are: lined with plastic, rubber lining, PTFE lining, Halar surface coating and the like.

(3) filter cloth (mesh) material: Cotton, polyester, polypropylene, polypropylene imported composite sintered net.

(4) sealing materials: rubber, fluorine rubber, PTFE and so on. Users in the selection of the properties of materials (physical properties, chemical properties, separation temperature, etc.) let us know so that we can make the selection based on the recommendations of the centrifuge separation media properties, and clearly in order.

2, explosion-proof performance: centrifuge material processed (or the environment), as containing organic solvents and other flammable materials, static electricity spark, the centrifuge should be explosion-proof. Explosion-proof performance depends on the process requirements (grade) OK.

(1) mechanical systems: explosion-proof motor, explosion-proof lighting, anti-static belts, anti-collision measures;

(2) electronic control system: Explosion-proof control box, explosion-proof fence, the non-contact type power consumption brake, static grounding;

(3) Accessories: nitrogen protection device, the oxygen content detector, such as for explosion-proof requirements of the occasion, the user should be described in the order of the separation medium, explosion-proof requirements and grade, so that we can configure the device and take appropriate measures to meet explosion.

3, separation performance: which comprises separating effect, washing effect, processing capacity, degree of automation. When ordering the selection, because of differences in the nature of the material, including the viscosity of the material, and the particle size distribution, density, solid-liquid ratio, they are difficult to accurately identify the final separation.

(1) separation factor is an important factor affecting the centrifuge separation, which is the ratio of the centrifugal force suffered material to be separated and suffered gravity centrifugal force field, the centrifuge drum diameter and speed related.

Ft = & omega; 2r / g where: & omega; angular velocity of the drum, unit: rad / s

r is the radius of drum unit as follows: m

g is the acceleration of gravity, unit: m / s2

(2) For some materials, but also need to go through the filter cake washing, and some even washed several times in order to meet the requirements, it is necessary to configure the wash pipe. The effect of washing and washing time, speed, wash pipe structure in the form of washing a great relationship.

Physicochemical properties and separation (3) of the centrifuge capacity and material handling requirements, generally is one hour and the number of cycles generated by a single operation to estimate the weight of the cake.

Safe Use:

Users can be dangerous factor in the selection, installation, use and maintenance process:

1. Improper selection, such as models, specifications poor choice. The resulting machine is not working, or fail to meet the intended purpose;

2. Do not follow a predetermined range using a centrifuge. For example, general purpose centrifuge for flammable, explosive situation; there will be no anti-corrosion measures centrifuges for handling highly corrosive materials; the 1Crl8Ni9Ti material (contact material part of the material) centrifuges for processing halogen-containing and other elements;

3. Do not follow the prescribed operating procedures. For example drum reverse rotation, overload, overdrive, etc;

4. Not according to product instructions requirements for installation, commissioning, use, maintenance or modification centrifuges and centrifuge parts to increase self-attachment;

5. Operation and maintenance personnel are not induction training;

6. Not timely troubleshooting, not promptly discarded centrifuge failure of rubber lined, lined with plastic centrifuge does not always check for not recognizing the potential hazards (such as cracks, loss, etc.) caused by the drum and other accidents caused by the failure. Therefore, the user should be developed in the selection, installation, use and maintenance of appropriate measures to avoid the risk factors in order to achieve the purpose of safe use.